LIGHTDECORHUB PRODUCT GUIDE
400 LED Christmas Tree Lights with 16 Hanging Strands
Give your Christmas tree a cascading light effect with the aneeway 400 LED tree light set. Sixteen hanging strands create a curtain-like arrangement from the top of the tree, with 400 white LEDs distributed across the display. The set includes eight lighting modes and remote control, making it easier to change the atmosphere without reaching the power connection.
Measure your tree height and check the available power outlet before setup. The hanging strands have a combined length of 105.6 feet, so arrange them evenly and keep the cable and adapter away from areas where they could be pulled or stepped on.
PRODUCT OVERVIEW
A Cascading Light Display for Indoor Trees
Each of the 16 strands carries 25 LEDs, giving 400 lights in total. Spread the strands around the tree rather than bunching them on one side. Start at the top, lower each strand carefully, then step back and adjust the spacing until the light coverage looks balanced from the main viewing angles.
- Check the mounting ring and every strand before switching the lights on.
- Keep the adapter close to a suitable indoor outlet.
- Arrange the cable so it does not cross a doorway or walking route.
- Use the remote to select a mode and brightness that suit the room.
KEY PRODUCT FEATURES
400 White LEDs
16 strands carry 25 LEDs each.
16 Hanging Strands
Each strand measures 6.6 feet.
8 Lighting Modes
Select from eight reported light effects.
4 Brightness Levels
Adjust output to 25%, 50%, 75% or 100%.
Highlights at a Glance
Select from eight lighting modes and four brightness levels: 25%, 50%, 75% or 100%. The remote operates from up to 5 metres when aimed at the adapter. A memory function retains the last selected setting.
Watch the Product in Action



Product Images
Create an Even Tree Display
The lights suit indoor Christmas trees where a nearby power outlet is available. The 16-strand arrangement starts near the tree crown and falls toward the lower branches. Adjust strand spacing to suit the tree’s shape and your preferred coverage.
Inspect the strands, mounting ring, adapter and remote before setup. Position the ring at the top of the tree as shown in the supplied instructions. Separate the 16 strands and drape them evenly around the branches before connecting power.
Where These Lights Work Best
Use the remote or adapter control to select a mode and brightness level. The timer is listed as six hours on followed by eighteen hours off. Disconnect power before moving, adjusting or storing the lights.
- Brand: aneeway
- Model / part number: SW-LSL-02-400
- LED quantity: 400 white LEDs
- Strands: 16
- Length per strand: 6.6 ft
- LEDs per strand: 25
- Lighting modes: 8
- Brightness levels: 4
- Timer: 6 hours on / 18 hours off
- Remote range: up to 5 m, when aimed at the adapter
- Power: corded electric with supplied adapter
Setup and Installation
Product Specifications
The combined length of the hanging strands is 105.6 feet. This figure adds the 16 individual strand lengths; it does not describe one continuous cable. Available product documentation differs on the adapter output, so check the supplied adapter label for its exact rating.
These lights are intended for indoor seasonal decorating. Keep the adapter and electrical connections away from moisture. Do not install the set outdoors unless the product label and instructions for your exact version explicitly confirm outdoor use.
Lighting Modes and Brightness
How many LEDs are included?
The set includes 400 white LEDs across 16 strands.
How long is each strand?
Each strand measures 6.6 feet.
Does it include a timer?
Yes. The listed timer runs for six hours on and eighteen hours off.
Product Highlights
Indoor Use and Care
Shape and separate the tree branches before positioning the strands. Avoid pulling on the wires or placing them near sharp edges. Disconnect power before adjusting the lights and store the set carefully after the holiday season.
Frequently Asked Questions
Before You Install
Remote Control
Operate the lights from up to 5 metres when aimed at the adapter.
Timer Function
The listed timer runs 6 hours on and 18 hours off.
Indoor Use
Designed for indoor Christmas tree displays; keep electrical parts dry.
Make the Most of Your Tree
Shop the Product
Use the supplied instructions to place the mounting ring and arrange each strand. Check that the adapter matches the rating printed on the supplied unit, because available documentation does not consistently confirm its output voltage.









