LIGHTDECORHUB PRODUCT GUIDE
iBaycon Solar Flame String Lights – 27 ft, 10 Warm-White LEDs
Add a flame-inspired decorative glow to outdoor spaces with these iBaycon solar flame string lights. The 27-foot string carries ten warm-white LED bulbs that create a flickering flame effect without an open fire. Solar power makes the set useful for garden seating areas, patios, fences and other locations where a nearby electrical outlet may not be practical.
Place the solar panel where it can receive direct daylight and plan the bulb route before hanging the string. Keep the lights clear of sharp edges and avoid locations where the cable could be pulled or caught.
PRODUCT OVERVIEW
Warm-White Flame Effects for Outdoor Decoration
The ten LED bulbs create a decorative flame-inspired look without using real flames. The 27 ft advertised string length can suit patios, fences and garden seating areas where you want a warm accent after sunset.
Solar power supports placement without a nearby mains outlet. The listing also describes a dusk-to-dawn sensor and stake or screw mounting options for the solar component, depending on the supplied set.
KEY PRODUCT FEATURES
10 Flame-Effect LEDs
Ten warm-white LED bulbs create a decorative flickering flame-inspired look.
27 ft String
The advertised string length helps plan placement along fences and outdoor seating areas.
Solar Powered
The solar panel charges in daylight, avoiding a mains cable at the string.
Dusk-to-Dawn Operation
The seller describes automatic switching after dark and at dawn.
Highlights at a Glance
Product details: iBaycon brand, 27 ft advertised string, ten warm-white LEDs, solar power, automatic dusk-to-dawn operation and an IP65 rating listed by the seller.
- Plan the route along a fence, patio or garden seating area.
- Place the solar panel where it can receive daylight.
- Use only the mounting hardware and methods supplied with your set.
Product Images






My Instagram
Where to Arrange Flame String Lights
Use the string along a patio, fence, pergola or garden seating area. Arrange the bulbs so the flame-inspired effect remains visible from the main seating position, and leave enough space between the cable and nearby branches or structures. For the best solar charging, keep the panel in an open, sunny position rather than beneath dense foliage.
- Brand: iBaycon
- Product type: solar flame-effect outdoor string lights
- Advertised string length: 27 ft
- LED bulb count: 10
- Light colour: warm white
- Power: solar powered
- Waterproof rating: IP65, seller listed
- Automatic operation: dusk-to-dawn, seller listed
Solar Panel Placement and Mounting
Choose a location where the solar panel can receive daylight. The seller lists a total length including lead wire of approximately 35.9 ft and bulb spacing of approximately 2.95 ft. Use these figures to plan the route, allowing for the lead wire.
The lights can be mounted with the compatible stake or screw arrangement included for the chosen setup. Check the mounting pieces before installation and select the method that suits the surface. Keep the solar panel in a sunny position and secure the cable so it cannot be pulled loose.
PRODUCT DETAILS
String Length and Outdoor Use
The product is listed as a 27 ft string with ten warm-white flame-effect LEDs. The seller also reports approximately 35.9 ft total length including lead wire and about 2.95 ft between bulbs.
Solar charging performance depends on daylight and panel placement. The available product details do not state a fixed runtime, so consult the supplied instructions for charging and operating guidance.
Product Specifications
Confirm the weather-resistance rating and electrical details on the product label before placing the lights in an exposed location. Keep connections protected and avoid using the set in conditions beyond its stated rating.
SETUP AND FAQ
Common Questions
How many bulbs are included?
The string has ten warm-white LED bulbs.
How long is the string?
The advertised string length is 27 feet.
How should I position the solar panel?
Place it in an open area that receives direct daylight and keep it clear of shade.
CARE AND PLACEMENT
Keep the Solar String Ready
Position the Panel
Choose a spot with useful daylight for solar charging.
Route the String Safely
Plan the cable path and secure it using the supplied mounting hardware.
Check Weather Guidance
Follow the product instructions and treat IP65 as the seller-listed protection rating.
SHOP THE PRODUCT
Add Warm-White Flame Effects Outdoors
Review the product images, listed string length and current availability on the product page before ordering.









