LIGHTDECORHUB PRODUCT GUIDE
Tuffenough Solar Motion Sensor Flood Lights, 2-Pack
Improve visibility around entrances, driveways and garden paths with the Tuffenough solar motion sensor flood lights two-pack. Each fixture uses three adjustable light heads, allowing you to direct illumination toward different parts of an outdoor area. The motion sensor helps bring light on when movement is detected, making the pair useful for approaches, garages and side paths.
Plan the mounting positions before installation. Choose locations with suitable sunlight for the solar panels and aim the heads toward the areas that need coverage. Check the sensor direction and avoid pointing it toward passing traffic or other sources of repeated movement.
PRODUCT OVERVIEW
Three Adjustable Heads for Outdoor Coverage
Each fixture has a three-head layout that can be adjusted to cover more than one direction. Use the centre head for the main approach and angle the side heads toward nearby corners, gates or walls. For a balanced result, test the beam direction after mounting and make small adjustments rather than aiming every head at the same spot.
KEY PRODUCT FEATURES
Two-Light Pack
Plan lighting for two exterior positions using the supplied pair of fixtures.
Three Adjustable Heads
Aim each fixture toward selected parts of a driveway, entrance or side path.
Solar Motion Sensor
Solar charging and motion-triggered operation help reduce the need for wired power.
IP65 Listed Rating
The supplier lists IP65 water protection; do not submerge the fixture or connections.
Highlights at a Glance
Key listed details: two lights per pack, three adjustable heads on each fixture, 210 LEDs, up to 2,500 lumens, 6500K cool white, 3.7V DC solar power, remote control and three lighting modes.
- Adjust the heads to match the area you want to illuminate.
- Position the solar panel in direct daylight where practical.
- Test the remote and motion response before relying on the lights.
Product Images






My Instagram
Where to Place the Flood Lights
Use the two lights to plan coverage around a driveway, front entrance, garage approach, side path or garden access point. Install them at positions that receive daylight and provide a clear view of the area you want to illuminate. Keep the solar panels free from shade and dirt, and check the sensor’s field of view before fixing each unit in place.
- Pack quantity: 2 fixtures
- Light source: LED; 210 LEDs listed
- Maximum output: up to 2,500 lumens, supplier listed
- Colour temperature: 6500K cool white
- Power: solar, 3.7V DC
- Controls: motion sensor and remote
- Modes: 3
- Water protection: IP65, supplier listed
Solar Panel Positioning and Installation
Choose a stable wall surface and follow the supplied mounting instructions. Place the solar panel where it receives useful direct sunlight during the day. Roof overhangs, trees, nearby buildings, cloudy weather and shorter winter days can reduce charging.
After mounting, angle the three heads toward the area you want to cover. Check the sensor’s field of view and test the available modes with the remote. The current product information does not confirm a specific detection distance or timer duration, so consult the included instructions for those details.
PRODUCT DETAILS
Specifications and Practical Notes
The model is 8330D-210R and uses a black ABS housing with wall mounting. The electrical rating is 10W. Check the mounting position and solar-panel exposure before installation, and direct the three light heads toward the areas you want to illuminate.
Keep the solar panel clean and check the fixture after severe weather. Do not assume the lights can be submerged. Before drilling or mounting, confirm the surface is suitable and that the panel can receive daylight.
Product Specifications
Actual charging and lighting performance depends on daylight, shade, weather and battery condition. Keep the solar panel clean and choose a position that receives useful sunlight.
SETUP AND FAQ
Common Questions
Does the set include two lights?
Yes. The pack contains two solar motion sensor flood lights.
How should I aim the light heads?
Adjust the three heads on each fixture to cover the approach, entrance or path you want to illuminate.
CARE AND MAINTENANCE
Before You Rely on the Lights
Keep the Panel Clear
Clean dust and debris from the solar panel so it can receive daylight.
Check the Mounting
Inspect the wall fixing and head adjustment after installation and severe weather.
Test the Sensor
Confirm the sensor view, remote and selected mode before regular use.
SHOP THE PRODUCT
Explore the Tuffenough Two-Pack
Before ordering, confirm the two-pack quantity, mounting position and the current options shown on the LightDecorHub product page. Check the delivery information at checkout.









